AC Installation in Oklahoma City
A new AC system is one of the biggest investments you will make in your home. Baker Heating & Air has been installing central air conditioning for Oklahoma City homeowners since 1987.
Our licensed, insured, and NATE-certified technicians hold EPA 608 certification and install every system the right way: proper sizing, clean work, and equipment that fits your home and your budget.
Call Now for a Free Estimate
Not sure if you need a repair or a full replacement? We can help you figure that out.
Same-Day Service You Can Count On
Call Baker
A real person answers, no hold queues
Schedule
We schedule your same-day window and confirm the technician
Receive a Quote
Your tech arrives on time, diagnoses accurately, quotes upfront
Work Gets Done
You approve. We fix it. We test before we leave.
How to Know When to Replace Your Air Conditioner
Are You Noticing Any of These AC Problems?
Most homeowners do not plan to replace their air conditioner. But there comes a point when continuing to repair an older system costs more than replacing it. In many cases, a new system is the better long-term investment.
Here are the signs Baker technicians look for:
Same-Day Service
Emergency response available
Is Your System 12 to 15 Years Old?
The average central AC system lasts 12 to 15 years with proper maintenance. Once a system crosses that threshold, parts become harder to source, efficiency drops, and repair costs climb. If your system is in that range and something significant breaks, replacement is usually the smarter financial decision.
01
Are You Paying for Repairs More Than Once a Season?
One repair every few years is normal. Two or three repairs in a single summer is a system telling you something. Add up what you have spent over the last two or three years. If that number is approaching a significant portion of a new system’s cost, you are likely throwing good money after bad.
02
Have Your Energy Bills Climbed Without Explanation?
Older systems lose efficiency over time. A system rated at 13 SEER when new may be performing well below that after years of wear. If your cooling bills have increased and nothing else in your home has changed, your system’s efficiency may be the reason.
03
Does Your System Use R-22 Refrigerant?
R-22 (Freon) was phased out of production in 2020. If your system still uses it and develops a refrigerant leak, the cost to recharge it, if refrigerant is even available, can be substantial. A system built around an obsolete refrigerant is a system living on borrowed time.
04
Not sure what is right for your situation?
Why Proper AC Installation Matters as Much as the Equipment You Choose
Two homes can buy the exact same AC unit and end up with completely different results. The difference is almost always the installation.
Baker does not guess at sizing. Before we recommend a system, we calculate the actual cooling load for your home using a Manual J load calculation — accounting for square footage, ceiling height, insulation, window placement, sun exposure, and local climate data.
Oversized System
- Cools too fast — shuts off before removing humidity
- Home feels cold and clammy, not comfortable
- Short-cycling wears equipment prematurely
- Higher energy bills despite fast cooling
Undersized System
- Runs constantly on the hottest days
- Struggles to reach the set temperature
- Equipment runs at maximum load — wears fast
- Your home is never quite comfortable
Properly Sized — Baker's Approach
- Calculated from your home’s actual cooling load
- Removes humidity while cooling — real comfort
- Runs in efficient cycles — equipment lasts longer
- Lower energy bills, better performance year-round
What Sets a Baker Installation Apart
What separates a reliable AC installation from a frustrating one comes down to the details. Here’s how Baker approaches each installation to make sure your system performs as it should from day one.
Right-Sized Equipment, Every Time
Before we recommend a system, we calculate the actual cooling load for your home. Manual J load calculation accounts for your home’s square footage, ceiling height, insulation levels, window placement, sun exposure, and local climate data. That calculation tells us exactly what your home needs. Not what is close. Not what we have in stock.
Charged to Manufacturer Specification
An improperly charged system runs harder, wears faster, and costs more to operate. Baker technicians verify refrigerant charge on every installation to the manufacturer’s specifications.
Problems Found Before They're Your Problem
A new system connected to leaking or undersized ductwork will underperform regardless of equipment quality. We assess your existing ductwork as part of the installation process and flag any issues before they become your problem.
Done Correctly, Not Quickly
Every Baker installation is performed to Oklahoma mechanical code standards. Electrical connections, drain lines, condensate management, and system clearances are done correctly, not quickly.
AC Systems We Install for Oklahoma City Homes
Baker installs air conditioning systems from trusted manufacturers, with options across efficiency levels to fit your home and budget.
We install brands including:
Carrier
Trane
Rheem
Lennox
Goodman
Amana
We explain your options honestly
We explain efficiency, warranties, and pricing in plain terms so you can choose the right system without pressure.
Ongoing Maintenance Matters
Routine maintenance protects your system, keeps it running efficiently, and helps maintain warranty coverage. Ask about our HVAC maintenance plans or schedule your first tune-up after installation.
After installation, keeping your new system on a regular maintenance schedule protects your investment and keeps your manufacturer’s warranty intact. Ask your Baker technician about our HVAC maintenance plans or schedule your first tune-up when we wrap up your installation.
Understanding SEER2 Ratings
Efficiency & SEER2
SEER2 is the current efficiency standard for air conditioning systems. A higher number means less energy to produce the same cooling. For Oklahoma City homeowners running AC from May through September, that difference shows up in real dollars every month.
Entry level - Lower upfront cost, higher monthly bills
Popular Choice - Good balance of upfront cost and monthly savings
Baker Recommends - Strongest ROI for Oklahoma's long cooling season
Maximum Efficiency - Best for long-term homeowners
Estimated Annual Savings
14 SEER2 vs. higher efficiency — typical OKC home
14 SEER2 (baseline)
$0 saved
16 SEER2
~$120–160/yr
18 SEER2
~$220–300/yr
22 SEER2
~$380–480/yr
Estimates based on average OKC utility rates and a 2,000 sq ft home. Actual savings vary. Baker will run the specific numbers for your home during your estimate.
Get my Savings EstimateNew AC System, Monthly Payments You Can Work With
Typical installed cost for OKC homes
$8,000 – $15,000
That’s a real number, and we’re not going to pretend otherwise. Baker offers financing options so you don’t have to choose between your family’s comfort and your budget. Many homeowners are surprised by how manageable the monthly payments are when spread over a reasonable term.
What to Expect During Your Baker AC Installation
From the moment you call to the moment your home is cool again — here’s exactly what to expect. No guesswork, no surprises.
01
Free In-Home Estimate
Step 1
- click to expand +
A Baker technician visits your home, assesses your current system and ductwork, performs a load calculation, and walks you through your equipment options with honest recommendations. No pressure, no rush.
02
Equipment Selection and Scheduling
Step 2
- click to expand +
Once you choose your system, we schedule your installation at a time that works for your household. Most installations are completed in one day.
03
Installation Day
Step 3
- click to expand +
Our crew arrives on time, protects your floors and work areas, removes your old system, and installs the new equipment. Before we pack up, we verify every component: airflow, refrigerant charge, thermostat calibration, and drainage. If something is off, we fix it on the spot.
04
System Walkthrough
Step 4
- click to expand +
Before we leave, we will walk you through your new system, show you the thermostat settings, and answer any questions. You will know exactly what was installed and why.
05
Follow-Up
Step 5
- click to expand +
Baker stands behind our installations. If something is not right after we leave, call us. We come back.
Frequently Asked Questions
What Customers Ask
How much does a new AC system cost in Oklahoma City?
A new central AC system in Oklahoma City typically costs between $8,000 and $15,000, depending on your home’s size, the equipment tier you choose, and any required ductwork or electrical work. Baker gives you a specific number during your free in-home estimate with no obligation.
How long does a central AC installation take?
Most standard residential installations are completed in one day. If your project requires ductwork modifications or electrical upgrades, it may extend to two days. Your Baker technician will give you a realistic timeline during the estimate.
How do I know what size AC system I need?
Size is determined by a Manual J load calculation, not by your home’s square footage alone. Ceiling height, insulation, window area, sun exposure, and other factors all affect the result. Baker performs this calculation before recommending any equipment.
Is a more expensive, high-efficiency system worth it?
It depends on how long you plan to stay in the home and how much you currently spend on cooling. A higher-efficiency system costs more upfront but produces measurable monthly savings. Baker can run the numbers for your specific situation so you can make an informed decision.
Do I need new ductwork when I replace my AC?
Not always. Baker assesses your existing ductwork as part of every installation. If we find leaks, blockages, or sections that are undersized for your new system, we flag them before installation so there are no surprises. Many homes have ductwork that performs well with a properly sized new system.
What warranty comes with a new system?
Most new AC systems carry 5 to 10 year parts warranties, with some manufacturers offering longer coverage on compressors. Baker’s installation labor is also warranted. Ask your technician for specifics on the equipment you are considering.
Can I finance a new AC system?
Yes. Baker offers financing through a lending partner. Many homeowners qualify for monthly payment options that make a new system affordable without depleting savings.
What Oklahoma City Homeowners Say About Baker
What Customers Say
We’ve been earning the trust of OKC homeowners for 38 years. Here’s what a few of them have to say.
4.9
★★★★★
Based on 500+ Google Reviews
★★★★★
“Baker replaced our 18-year-old unit last summer, and the difference was immediate. The house actually gets cool now, and our electric bill dropped noticeably. The crew was professional and done in one day.”
Sandra M.
Edmond, OK
★★★★★
“I got three quotes. Baker was not the cheapest, but the technician was the only one who actually measured things and explained what size we needed and why. Went with Baker and have zero regrets.”
Kevin T.
Oklahoma City, OK
★★★★★
“The financing made it possible for us to get a quality system without draining our savings. The whole process was straightforward and the installation crew was great.”
Diane R.
Moore, OK
Ready to Get Your Home Cooling the Way It Should?
Ready to Get Started?
A new AC system is a significant investment. Baker has been helping Oklahoma City homeowners make that investment confidently since 1987. We size your system correctly, install it properly, and stand behind the work.
Call Baker Heating & Air today for your free in-home estimate. We will assess your home, walk you through your options honestly, and give you a number you can plan around.
Schedule a Service CallCall Us Now
